Using a powerful machine like John Deere S680 is helpful for many farmers. However, it is easy to get confused in performing different combine settings, especially when you don’t have detailed knowledge. It is easy to get your work done when you’ve quick tips for John Deere S680 combine settings. So today, we’ve prepared a detailed list of some valuable information in this section.
Tips for combine settings
- Doing power shutdown
Going for a power shutdown is the best solution for different combines, especially if your combine is creating issues in speed. It is easy to get the machine with complete material running at the ground speed as defined. The following process includes pulling the hydro to the neutral, stopping the separator and the head, and idling it down. Then, the head is raised and backed up about three feet, followed by an engine shutdown.
- Looking in the front of the combine
For problems like kernel counting, it is essential to look in front of the machine. The wind shatter, disease, or critter damage may cause kernels to lie on the ground already. These can be counted and taken into account for overall seeds.
- Inspecting the feeder house
It is easy for the combine users to inspect the feeder house for different performance-related issues. A significant amount of loose grain may be located in this section. All you need to do is check the feeder house drum problems and the feeder house conveyor chain trouble. It is essential to ensure that the machine doesn’t perform the work of a thresher here.
- Several machines in one
Professional combine users understand that a combine is a set of different machines operating as one. Hence, while dealing with various combine issues, it is crucial to pay attention to the other parts, like the separator, cleaning machine, and grain tank. So, all you need to do is check if all grains are out of the rotor before the last tines and separator grates.
Further, the wheat straw shouldn’t be over-threshed and should be fairly intact. Not to miss is a quick check of the grain tank sample. It should be clean with no cracks with a minimal loss of kernels on the ground.
- Checking the tailing systems
The problems like grain damage occur due to the over threshing of the grains. All you need to do is check the tailing system of the combine. The threshed heads, wheat, and millet ensure that grains are clean. So, keep the tailings to the minimum and open the sieves to prevent any grain damage in such cases.
- Effective residue handling
Last but not least is effective residue handling. It is easy to go for the fully engaged stationary knives or running old chopper at high speed. The power-saving settings of slow speed with fewer stationary knives are recommended for managing fuel and money.
Parting words
It is easy for the farmers to go ahead with their John Deere S68 combine settings using the tips mentioned above. Beginners and professionals can go ahead with these tricks to manage their combine for more productivity during harvesting.