All Crops Case IH Concaves

How To Increase Yield & Stop Rotor Loss?

The life of the farmer has become easier today. This is because of the technological advancement of farming equipment. So they no longer have to work manually. Instead of that, they can utilize the latest and most advanced combine, concave model. Since, this particularly advanced machinery is operational with the embedded conveyor system and thus, it is doing less damage to the grains as well as the crops. It minimizes rotor loss and is capable of working with almost all types of crops. Through the utilization of the latest technology embedded in a concave setting, the crop yielding manually is reduced to a greater extent.

Advanced Combine Concave Machinery Does Less Damage To Crops

To assist the farmers, the use of combine concave with appropriate settings not only saves time but also stops rotor loss. So this allows farmers to carry out the threshing of distinctive varieties of crops in almost any conditions, leading to the achievement of cleaner samples and reduced field time. Consequently, it will be resulting in a reduction in the fuel cost and also helps to stop rotor loss. The utilization of this farming equipment is fast and safe. Also, it is extremely convenient to operate. The appropriate setting is capable of handling the grain load. Also, it is imbibed with safety features and this makes it most appropriate for utilization in an environment that is unsafe for the storage of grains.

Appropriate Setting Of Combine Concave Stop Rotor Loss

The rotor loss takes place in concave combine due to the overloaded separation section. The overloading separator occurs when the threshed grains are not enough being captured within the concave section. The separator is then not in a position to carry out the separation of a large volume of grains along with the crops that are fed in from this equipment. However, the advanced concave system today stops rotor loss as well as the volunteer yield. The system has been specifically developed to keep the rotor full. The bars comprise of 135% wide threshing area in comparison to the stock round bars. This facilitates complete as well as quick threshing operation. The setting of the combined machine is initiated towards the header. It is because on average around 65% of the machine harvesting loss is taking place here.Another setting is to match the gathering chain as well as to stalk out the rolling speed for combining ground speed.

Make Necessary Adjustments In Farming Equipment To Stop Rotor Loss

Since this combine can keep the rotor component full, it facilitates the opening up of the concave and slowing down of the rotor. This will be resulting in less grain damage, fewer splits, cracks, and broken kernels, and stop rotor loss. The performance dynamic will be altered by changing the components of combine. This will be including the parts like the head, threshing component, separator, cleaning shoe & residue management system. Although, adjusting combine machines in tough farming conditions can be quite complicated. However, understanding the dynamics of this component and making necessary adjustments will be paying you off handsomely in the long run.

Leave a Reply

Your email address will not be published.